Home 샤나인코더 자유게시판
질문
2021.10.05 17:31

인코딩 오류 로그좀 봐주세요...

프리셀
조회 수 2230 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

 

 

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:08

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:09

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:09

 * 인코딩 시작:

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:11

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:13

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:13

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:14

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:14

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:15

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:15

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:16

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:16

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:17

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:17

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================
 

Facebook Twitter Pinterest Kakao
위로 아래로 댓글로 가기 인쇄
에디터 선택하기
?
  1. No Image notice by Rina 2024/03/22 by Rina
    Views 16855  Likes 5

    소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다. 0

  2. No Image notice by Rina 2021/09/30 by Rina
    Views 31500  Likes 2

    샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.) 0

  3. No Image notice by Rina 2020/03/18 by Rina
    Views 28427  Likes 5

    자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요 0

  4. notice by JKyle 2019/09/16 by JKyle
    in 일반
    Views 49677  Likes 8 Replies 3

    [필독] 질문 전에 반드시 읽으세요!!! 3

  5. No Image notice by JKyle 2018/10/12 by JKyle
    in 일반
    Views 46952  Likes 18 Replies 24

    [알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 24

  6. 24Oct
    by 스덕
    2021/10/24 by 스덕
    in 질문
    Views 2529  Likes 0 Replies 4

    잔상? 그림자? 같은게 인코딩시 자꾸 생겨요.. 4

  7. 19Oct
    by 모노유키
    2021/10/19 by 모노유키
    in 질문
    Views 2431  Likes 0 Replies 4

    인코더 할려니까 왜 자막이 ㅁㅁ 으로 되나요? 4

  8. 19Oct
    by rre4543ee
    2021/10/19 by rre4543ee
    in 질문
    Views 2144  Likes 0 Replies 1

    영상 초반 8초까지만 화질이 깨집니다 1

  9. 19Oct
    by 지연
    2021/10/19 by 지연
    in 질문
    Views 2578  Likes 0 Replies 1

    살려주세요.. mp4 파일인데 영상재생이 안 돼요ㅠㅠ 1

  10. 18Oct
    by TOME
    2021/10/18 by TOME
    in 질문
    Views 3204  Likes 0 Replies 3

    HEVC로 재 인코딩하여 영상을 저장하는데 용량이 더 커지는 이유가 궁금합니다 3

  11. 17Oct
    by cookieleeuns
    2021/10/17 by cookieleeuns
    in 질문
    Views 1948  Likes 0 Replies 2

    vob 파일 인코딩이 안됩니다 2

  12. No Image 16Oct
    by 류강열
    2021/10/16 by 류강열
    in 질문
    Views 2194  Likes 0 Replies 1

    인코딩 후 어떤것은 재생이 되고 어떤것은 재생이 안되는 이유를 아실까요? ㅠ.ㅠ 1

  13. No Image 16Oct
    by tana.
    2021/10/16 by tana.
    in 질문
    Views 4746  Likes 0 Replies 2

    퀀타이저 보다 퀄리티를 추천하시는 이유가 있나요? 2

  14. No Image 15Oct
    by avbaer01
    2021/10/15 by avbaer01
    in 질문
    Views 1644  Likes 0 Replies 1

    오디오 넣기 + 비디오 배속 한번에 할 수 있나요? 1

  15. No Image 14Oct
    by 나가
    2021/10/14 by 나가
    in 질문
    Views 4114  Likes 0 Replies 1

    mp4파일에서 자막을 추출할수있나요. 1

  16. No Image 13Oct
    by 트레비앙
    2021/10/13 by 트레비앙
    in 질문
    Views 1918  Likes 0 Replies 2

    원본 자동 삭제 2

  17. No Image 12Oct
    by Antexon
    2021/10/12 by Antexon
    in 질문
    Views 2088  Likes 0 Replies 1

    1080i H264 -> 1080i MPEG2 인코딩이 가능한가요? 1

  18. No Image 12Oct
    by 산골소년
    2021/10/12 by 산골소년
    in 질문
    Views 1451  Likes 0 Replies 1

    자막 색상 지정하기 1

  19. No Image 12Oct
    by Boney
    2021/10/12 by Boney
    in 질문
    Views 1930  Likes 0 Replies 1

    빠른답변 부탁합니다! 급합니다! 영상 변환에 문제가 있네요. 1

  20. No Image 11Oct
    by TOME
    2021/10/11 by TOME
    in 질문
    Views 2009  Likes 0

    인코딩 오류 원인이 무엇일까요? 0

  21. No Image 09Oct
    by TOME
    2021/10/09 by TOME
    in 질문
    Views 2579  Likes 0 Replies 2

    HEVC 인코딩의 P7, SLOW 프리셋 차이가 궁금합니다 2

  22. 08Oct
    by didznl
    2021/10/08 by didznl
    in 질문
    Views 5371  Likes 0 Replies 1

    삼성TV 인코딩 어떻게 해야 할까요 ㅠㅠㅠ 1

  23. No Image 07Oct
    by 오월
    2021/10/07 by 오월
    in 질문
    Views 1585  Likes 0 Replies 2

    인코딩 후 영상 사라짐 2

  24. No Image 05Oct
    by 프리셀
    2021/10/05 by 프리셀
    in 질문
    Views 2230  Likes 0

    인코딩 오류 로그좀 봐주세요... 0

  25. No Image 05Oct
    by jsjo
    2021/10/05 by jsjo
    in 질문
    Views 2087  Likes 0 Replies 2

    [질문]h.264 프로파일과 레벨, 영상사이즈의 관계 2

쓰기
Board Pagination Prev 1 ... 28 29 30 31 32 33 34 35 36 37 ... 165 Next
/ 165