인코딩 오류 로그좀 봐주세요...

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:08

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:11

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

번호	분류	제목	글쓴이	날짜	조회 수	추천 수
공지		소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다.	Rina	2024.03.22	20250	6
공지		샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.)	Rina	2021.09.30	34209	2
공지		자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요	Rina	2020.03.18	30425	5
공지	일반	[필독] 질문 전에 반드시 읽으세요!!! 3	JKyle	2019.09.16	52476	8
공지	일반	[알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 24	JKyle	2018.10.12	50055	18
485	질문	HEVC 인코딩의 P7, SLOW 프리셋 차이가 궁금합니다 2	TOME	2021.10.09	2948	0
484	질문	삼성TV 인코딩 어떻게 해야 할까요 ㅠㅠㅠ 1	didznl	2021.10.08	5647	0
483	질문	인코딩 후 영상 사라짐 2	오월	2021.10.07	1814	0
»	질문	인코딩 오류 로그좀 봐주세요...	프리셀	2021.10.05	2463	0
481	질문	[질문]h.264 프로파일과 레벨, 영상사이즈의 관계 2	jsjo	2021.10.05	2303	0
480	질문	홀짝 프레임만 추출하는 방법 ?	엘비라	2021.10.04	1528	0
479	질문	'합치기'라는 명칭 자체에 의문이 있는데요. 2	dung620	2021.10.03	3036	0
478	질문	버그....합치기 모드로 인코딩 시 파일 명 같은게 있으면 그냥 덮어씌워져버리네요 1	비사용중	2021.10.02	1830	0
477	질문	ffmpeg 옵션없이 사용하는 방법은 어떻게 세팅해야 하나요? 1	얼음	2021.09.28	1676	0
476	질문	코덱이나 화질변화 없이 HDR을 SDR로 변환할 수 없나요? 2	닭발은세개	2021.09.27	5264	0
475	질문	아이돌 음방영상 깍뚜기 영상 없에는 방법좀... 1	승쓰	2021.09.26	2252	0
474	질문	hevc로 인코딩을 하는편인데 화질 디테일이 설정한 매계변수보다 떨어지는거 같은데 이유를 모르겠습니다. 2	완자	2021.09.24	3414	0
473	질문	구형 AMD CPU에서 HEVC 인코딩의 효율성 문제 3	EON	2021.09.22	2753	0
472	질문	해외 교민인데 동영상 재생 관련하여 급한 질문이 있습니다. 꼭 좀 봐주세요 2	유니버셜킴	2021.09.21	2256	0
471	질문	샤나인코더 스마트폰 프리셋 질문 1	규를먹고싶음	2021.09.20	2404	0
470	질문	hevc 8bit, 10bit 인코딩 문의 1	talecue	2021.09.13	4620	0
469	질문	검색해도 없어서 질문합니다. 2	lilililililililil	2021.09.09	2295	0
468	질문	truehd atmos 를 eac3 atmos 로 변환 하는 방법이 있을까요 4	구름둥둥	2021.09.08	2940	0
467	질문	업스케일링 하는 방법 좀 알려주세요... 1	FXXKLUXY	2021.09.08	4291	0
466	질문	mp4 다운했는데 동영상 정보도 볼수 없을때는 어떻게 해야될까요 2	센스짱	2021.09.07	2159	0

인코딩 오류 로그좀 봐주세요...

단축키

단축키