인코딩 오류 로그좀 봐주세요...

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:08

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:11

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

번호	분류	제목	글쓴이	날짜	조회 수	추천 수
공지		소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다.	Rina	2024.03.22	13974	5
공지		샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.)	Rina	2021.09.30	28698	2
공지		자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요	Rina	2020.03.18	26330	5
공지	일반	[필독] 질문 전에 반드시 읽으세요!!! 3	JKyle	2019.09.16	45991	7
공지	일반	[알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 24	JKyle	2018.10.12	43489	18
2663	질문	인코딩시 소리를 변경 할 방법이 있나요?? 4	냥바	2021.11.30	1604	0
2662	질문	오디오 코덱 1	승쓰	2021.11.29	1866	0
2661	질문	인코딩 질문 좀요!! (제 환경에 맞는?) 2	즉시	2021.11.29	1579	0
2660	질문	구형TV용 설정... 1	녹공	2021.11.28	1512	0
2659	질문	내장자막이 있는 동영상을 인코딩하엿을시에 자막이 안나오는 현상 1	하이웨이스타	2021.11.19	1819	0
2658	질문	오류 기록 좀 봐 주세요 1	TOME	2021.11.19	2658	0
2657	질문	화질 향상 3	승쓰	2021.11.16	2164	0
2656	질문	TV에 재생이 되는 파일과 안되는 파일이 있는데 한번 봐주실 수 있으실까요? 3	초남양	2021.11.15	2706	0
2655	질문	Resize -1 적용시 하단 띠 문제	P군	2021.11.13	1385	1
2654	질문	중간에 외장하드 빠져서 오류 났는데 해결 방안좀... 1	승쓰	2021.11.12	1529	0
2653	질문	동영상 합치기 오류 1	kkk339	2021.11.10	2469	0
2652	질문	k3g 파일이 인코딩 오류 1	어지니	2021.11.08	1444	0
2651	질문	윈도우11에서 인코딩 속도가 빠르다는데요? 1	핀다	2021.11.06	2562	0
2650	질문	자막 질문 3	DK	2021.10.29	2238	0
2649	정보	mkv확장자를 가진 동영상에서 자막을 불리해 보자(넷플릭스나 디즈니 아마존등의)	pcsence	2021.10.29	2356	0
2648	질문	잔상? 그림자? 같은게 인코딩시 자꾸 생겨요.. 4	스덕	2021.10.24	2340	0
2647	질문	인코더 할려니까 왜 자막이 ㅁㅁ 으로 되나요? 4	모노유키	2021.10.19	2269	0
2646	질문	영상 초반 8초까지만 화질이 깨집니다 1	rre4543ee	2021.10.19	2033	0
2645	질문	살려주세요.. mp4 파일인데 영상재생이 안 돼요ㅠㅠ 1	지연	2021.10.19	2444	0
2644	질문	HEVC로 재 인코딩하여 영상을 저장하는데 용량이 더 커지는 이유가 궁금합니다 3	TOME	2021.10.18	3064	0

인코딩 오류 로그좀 봐주세요...

단축키

단축키