인코딩 오류 로그좀 봐주세요...

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:08

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:11

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

번호	분류	제목	글쓴이	날짜	조회 수	추천 수
공지		소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다.	Rina	2024.03.22	5086	4
공지		샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.)	Rina	2021.09.30	19872	2
공지		자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요	Rina	2020.03.18	17556	5
공지	일반	[필독] 질문 전에 반드시 읽으세요!!! 3	JKyle	2019.09.16	34236	7
공지	일반	[알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 23	JKyle	2018.10.12	29858	16
863		샤나인코더 고급설정 이렇게 했는데 단점이라던가 있을까요? 5	날라가	2019.04.23	1698	0
862		nvenc로 2개 이상 동시인코딩 하면 에러가 납니다. 3	유키링	2018.06.19	1699	0
861		mxf파일 변환 2	디데이	2019.05.30	1699	0
860		[도와주세요!] 코덱ID를 변경하는 방법이 있나요? (isom -> mp42) 1	강치	2019.11.15	1701	0
859		m2ts 파일을 우연히 구해서 인코딩 해보려고 했는데 5	ハルト	2019.09.09	1702	0
858	질문	샤나인코더에 영상을 분할하는 등의 기능은 없나요? 1	Laon	2020.09.17	1702	0
857		인코딩 후 TV 재생시 동영상 끊김 현상이 생깁니다 1	Iam공학도	2017.08.09	1713	0
856		샤나인코더 hevc mp4 인코딩 cpu 점유율 하락 질문드려요 9	쩌는사냐인코더	2017.02.01	1715	0
855		H264 설정 알려주세요 1	잭슨	2019.07.08	1715	0
854	질문	오디오 샘플 속도(샘플링 레이트) 확인은 어떻게 하나요? 서로 다르게 나옵니다. 1	로르샤흐	2020.06.28	1715	0
853	질문	HEVC 인코딩의 P7, SLOW 프리셋 차이가 궁금합니다 2	TOME	2021.10.09	1716	0
852	일반	HVEC로 인코딩하여도 H264와 용량차이가 없네요. 4	유이오	2023.04.20	1717	0
851		HEVC(NVENC) 화질 향상 프리셋는 있던데요 HEVC(AMF) 화질향상은 할수 없을까요 도움부탁드려요 2	성이야놀아앙	2019.12.02	1719	0
850	질문	RTX 40번대는 NVENC 품질이 좀 괜찮은가요? 6	RTX 4070	2023.03.30	1719	0
849	질문	최신버전 실시간 인코딩 체크하면 안돼요 10	샤나따봉	2021.04.20	1720	0
848		샤나 인코더로 인코딩하면 베가스에서 인식이 안되는 이유가 무엇인지요 1	서툴대	2018.11.05	1721	0
847		'무조건' 인코딩을 해야 한다고 가정했을 때 48khz 에서 44.1khz로 재인코딩 vs 44.1khz에서 44.1khz로 재인코딩 어느 게 낫나요? 7	로르샤흐	2019.09.20	1723	0
846	일반	※자동재생 주의※ 5.1 버전 업데이트 후 ass 자막 테스트 해봤습니다 2	LDC	2020.10.17	1728	2
845	일반	고화질동영상 옹량이 줄이려면 옵션설정이 어떻게 됫나요? 1	look92	2021.06.23	1729	0
844		인코딩 빠른설정 셋팅 도움 좀 부탁드립니다...!! 2	갱형	2018.09.22	1731	0

인코딩 오류 로그좀 봐주세요...

단축키

단축키