인코딩 오류 로그좀 봐주세요...

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:08

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:11

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

번호	분류	제목	글쓴이	날짜	조회 수	추천 수
공지		소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다.	Rina	2024.03.22	13248	5
공지		샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.)	Rina	2021.09.30	27940	2
공지		자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요	Rina	2020.03.18	25916	5
공지	일반	[필독] 질문 전에 반드시 읽으세요!!! 3	JKyle	2019.09.16	45302	7
공지	일반	[알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 24	JKyle	2018.10.12	42745	18
1123	질문	인코딩 할려니까 오류가 뜨네요 1	하일렌	2020.05.05	1823	0
1122	질문	tp ts 본이 화질상 정확히 1080p와 얼마나 차이가 나는 건가요(제가 질문을 너무 이상하게 해서 다시 질문드려요) 3	r371	2020.05.05	2310	0
1121	질문	인코딩 오류 1	보라아	2020.05.07	1021	0
1120	질문	2Audio를 인코딩하되, Default를 바꾸고 싶습니다 2	bobomama	2020.05.07	1638	0
1119	질문	ts파일을 300mb으로 인코딩하려면 어떻게 하나요 1	chi2yo	2020.05.09	1072	0
1118	질문	똑같은 영상인데 이 정도 차이면 4K가 더 화질이 좋은 건가요? 1	지나가는나그네	2020.05.10	1062	0
1117	질문	HDR에서 SDR로 인코딩 1	버터	2020.05.10	1873	0
1116	질문	인코딩 오류 문제 좀 도와주세요. 2	루카	2020.05.10	2161	0
1115	질문	인코딩시 다중 오디오 메타데이터 입력 방법 질문입니다. 4	loasis	2020.05.11	1728	0
1114	질문	인코딩시 다른툴과 비교, 화질 문제에 대해 6	shaman	2020.05.12	2194	0
1113	질문	(테스트 후기) 아래 질문 글 정정과 보충. 4	shaman	2020.05.12	1451	0
1112	질문	샤나에서 인코딩시 색감?이 변하는 문제 2	사성빛	2020.05.13	1664	0
1111	질문	인코딩시 자꾸 오류가 발생합니다 1	alicia	2020.05.13	1763	0
1110	질문	1920x1080파일과 1080x1920파일을 합치기할경우 앞의 해상도로 다 맞춰지는데.. 1	다크렌	2020.05.13	1845	0
1109	질문	delogo 필터 질문 4	hoo	2020.05.14	1777	0
1108	질문	영상에 입혀진 자막 제거? 2	주래등	2020.05.17	3907	0
1107	질문	1Audio 원본 파일에 음성을 하나 더 추가해 2Audio로 만들고 싶습니다 5	bobomama	2020.05.18	2819	0
1106	질문	화질을 최우선으로 살리고 용량은 거기에 맞춰서 설정하려면 어떻게 해야 하나요? 1	몸근영	2020.05.18	1754	0
1105	질문	아이폰에서 슬로우모션으로 잘못찍은 영상을 인코딩 하려고 하는데요. 2	인코딩하기	2020.05.19	1187	0
1104	질문	인코딩시 소리가 깨집니다. 2	072	2020.05.19	1253	0

인코딩 오류 로그좀 봐주세요...

단축키

단축키