인코딩 오류 로그좀 봐주세요...

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:08

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:09

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:10

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:11

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:12

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:13

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:14

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:15

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:16

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

>> 작업 시작시간: 2021-10-05 오후 5:27:17

* 인코딩 시작:

Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

* 인코딩 오류가 발생했습니다.

>> 속도 0x 진행 시간 00:00:00

==================================================

번호	분류	제목	글쓴이	날짜	조회 수	추천 수
공지		소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다.	Rina	2024.03.22	5330	4
공지		샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.)	Rina	2021.09.30	20380	2
공지		자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요	Rina	2020.03.18	17909	5
공지	일반	[필독] 질문 전에 반드시 읽으세요!!! 3	JKyle	2019.09.16	36082	7
공지	일반	[알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 23	JKyle	2018.10.12	31094	16
1102		mkv - mp4 무압축 인코딩 문의 2	doremiimages	2017.09.29	2247	0
1101		vp9 비트레이트가 반토막으로 인코딩 돼요 v(-_(-_(-_-)_-)_-)v	핥아버지	2017.09.28	403	0
1100		자막과 로고 동시이용시 프레임 저하현상 wmv->mp4	레이	2017.09.27	359	0
1099		5기가 짜리 고해상도 영상을 1024x768로 인코딩했는데 재생할때 늘어나서 보이질 않는데 옵션어디를 2	서진	2017.09.26	519	0
1098		애니메이션 인코딩시 프레임23&29.97 1	카카시	2017.09.23	616	0
1097		비디오flv1 오디오nellymoser 이코덱이 자꾸 오류떠요 1	미낭미낭	2017.09.22	322	0
1096		인코딩이 안되요 2	착한동구	2017.09.21	779	0
1095		리프 인코더 Vs 샤나 인코더 (feat.vp8) 1	핥아버지	2017.09.21	911	0
1094		도와주셔요 ㅠㅠ 10bit(mkv) 영상을 8bit 영상으로 변환하고 싶어요 부탁드립니다 1	강나박	2017.09.21	1020	0
1093		질문이 있는데요.... 1	박선애	2017.09.20	250	0
1092		영상만 인코딩... 3	검은밤	2017.09.19	367	0
1091		고화질설정 방법이 너무 궁금합니다... 1	숨쉬는돌	2017.09.18	1874	0
1090		▶자막 줄간격◀ 어떻게 조절하는지 궁금합니다	현진	2017.09.15	426	0
1089		자막 설정 질문드려요!!	날라가	2017.09.15	405	0
1088		저에게 가르침을 주소서 hevc 3	핥아버지	2017.09.06	627	0
1087		자막 일괄 삭제	써니한쌤	2017.09.05	385	0
1086		인코딩시 자막문제좀 봐주십시요 1	pinapina	2017.09.04	396	0
1085		.sub 형식 자막 언어선택 불가능 현상	L리트	2017.09.03	529	0
1084		혹시 인코딩하면서 영상 크롭가능한가요??? 2	katya	2017.09.03	747	0
1083		현재 최신 CPU 7820X 혹은 1920X 급으로 HEVC인코딩 해보신분 있나요? 11	핀다	2017.09.01	911	0

인코딩 오류 로그좀 봐주세요...

단축키

단축키