Home 샤나인코더 자유게시판
질문
2021.10.05 17:31

인코딩 오류 로그좀 봐주세요...

프리셀
조회 수 1535 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄

인코딩 해야될 파일이 10개쯤 되는데...

전부 걸어 놓고 하니 다음과 같은 오류가 뜸니다.

대충보니 오류는 10개파일 다 똑같은거 같은데 혹시 몰라 10개다 올렸습니다.

그래픽카드는 지포스 1060 6기가하고 인텔 내장 그래픽 사용중 입니다.

 

 

[info] ShanaEncoder v5.2.2.3
[info] FFmpeg v2021.03.15.185
[info] Intel(R) HD Graphics 630
[info] NVIDIA GeForce GTX 1060 6GB

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:08

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d9952d5540] Specified rc mode is deprecated.
[h264_nvenc @ 000002d9952d5540] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d9952d5540] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d9952f0300] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:09

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000016a41d05300] Specified rc mode is deprecated.
[h264_nvenc @ 0000016a41d05300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000016a41d05300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000016a427ca600] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:09

 * 인코딩 시작:

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000179d3c658c0] Specified rc mode is deprecated.
[h264_nvenc @ 00000179d3c658c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000179d3c658c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000179d3d19000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000028e6d402440] Specified rc mode is deprecated.
[h264_nvenc @ 0000028e6d402440] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000028e6d402440] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000028e6d404c00] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000017e70400d00] Specified rc mode is deprecated.
[h264_nvenc @ 0000017e70400d00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000017e70400d00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000017e704c9c40] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:10

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001d89e2ce500] Specified rc mode is deprecated.
[h264_nvenc @ 000001d89e2ce500] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001d89e2ce500] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001d89e816040] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:11

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001a99793a280] Specified rc mode is deprecated.
[h264_nvenc @ 000001a99793a280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001a99793a280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001a997967640] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000022799365000] Specified rc mode is deprecated.
[h264_nvenc @ 0000022799365000] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000022799365000] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000022798cee780] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 0000020ccd0df280] Specified rc mode is deprecated.
[h264_nvenc @ 0000020ccd0df280] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 0000020ccd0df280] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000020ccd0e0000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:12

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b951904840] Specified rc mode is deprecated.
[h264_nvenc @ 000001b951904840] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b951904840] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b9518888c0] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:13

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000252148fd300] Specified rc mode is deprecated.
[h264_nvenc @ 00000252148fd300] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000252148fd300] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002521503bbc0] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:13

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001b8d57cf180] Specified rc mode is deprecated.
[h264_nvenc @ 000001b8d57cf180] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001b8d57cf180] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001b8d5892e00] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:14

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e944c48900] Specified rc mode is deprecated.
[h264_nvenc @ 000001e944c48900] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e944c48900] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e944c76200] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:14

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001dfe3854e40] Specified rc mode is deprecated.
[h264_nvenc @ 000001dfe3854e40] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001dfe3854e40] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001dfe399a000] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:15

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001e0c8b65e80] Specified rc mode is deprecated.
[h264_nvenc @ 000001e0c8b65e80] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001e0c8b65e80] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001e0c8b67800] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:15

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001df205f4580] Specified rc mode is deprecated.
[h264_nvenc @ 000001df205f4580] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001df205f4580] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001df205f5680] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:16

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000001deb9d8f2c0] Specified rc mode is deprecated.
[h264_nvenc @ 000001deb9d8f2c0] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000001deb9d8f2c0] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000001deb9d91e80] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:16

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000244c1b6b080] Specified rc mode is deprecated.
[h264_nvenc @ 00000244c1b6b080] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000244c1b6b080] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 00000244c1f04900] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:17

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 000002d25f128a00] Specified rc mode is deprecated.
[h264_nvenc @ 000002d25f128a00] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 000002d25f128a00] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 000002d25ec91280] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================

 >> 작업 시작시간: 2021-10-05 오후 5:27:17

 * 인코딩 시작: 

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_nvenc))
  Stream #0:1 -> #0:1 (aac (native) -> aac (libfdk_aac))
[h264_nvenc @ 00000153164c4340] Specified rc mode is deprecated.
[h264_nvenc @ 00000153164c4340] Use -rc constqp/cbr/vbr, -tune and -multipass instead.
[h264_nvenc @ 00000153164c4340] InitializeEncoder failed: invalid param (8): Presets P1 to P7 are not supported with older 2 Pass RC Modes(CBR_HQ, VBR_HQ) and cbr lowdelay.
Enable NV_ENC_RC_PARAMS::multiPass flag for two pass encoding a
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[libfdk_aac @ 0000015316acd240] 3 frames left in the queue on closing
Conversion failed!

 * 인코딩 오류가 발생했습니다.

 >> 속도 0x 진행 시간 00:00:00

==================================================
 

Facebook Twitter Pinterest Kakao
위로 아래로 댓글로 가기 인쇄
에디터 선택하기
?
  1. No Image notice by Rina 2024/04/11 by Rina
    Views 1271  Likes 0

    샤나 사이트 일시 접속 불가 안내 0

  2. No Image notice by Rina 2024/03/22 by Rina
    Views 3894  Likes 4

    소리를 4가지로 분리하는 샤나보컬리무버 프로그램을 소개합니다. 0

  3. No Image notice by Rina 2021/09/30 by Rina
    Views 18846  Likes 2

    샤나인코더 통합 검색 기능 개선(샤나인코더 우측 상단에 있는 검색창을 사용해 보세요.) 0

  4. No Image notice by Rina 2020/03/18 by Rina
    Views 16595  Likes 5

    자유게시판에서는 자유롭게 글을 작성할 수 있지만 다음과 같은 내용은 삭제돼요 0

  5. notice by JKyle 2019/09/16 by JKyle
    in 일반
    Views 32728  Likes 6 Replies 3

    [필독] 질문 전에 반드시 읽으세요!!! 3

  6. No Image notice by JKyle 2018/10/12 by JKyle
    in 일반
    Views 28296  Likes 16 Replies 23

    [알림] 질문 먹튀하지 마시기 바랍니다 => 본문 변경 금지 23

  7. No Image 27Apr
    by 하얀너구리
    2023/04/27 by 하얀너구리
    in 질문
    Views 986  Likes 0 Replies 5

    퀄리티 모드 질문 5

  8. 25Apr
    by 바람돌이
    2023/04/25 by 바람돌이
    in 질문
    Views 813  Likes 0 Replies 1

    넷플릭스 같은 자막(은은한 그림자) 효과 구현하기 1

  9. No Image 21Apr
    by IamSAM
    2023/04/21 by IamSAM
    in 질문
    Views 569  Likes 0 Replies 3

    기본 설정으로 인코딩 할 때, 파일 형식을 바꿀 수는 없나요? 3

  10. No Image 20Apr
    by 유이오
    2023/04/20 by 유이오
    in 일반
    Views 1600  Likes 0 Replies 4

    HVEC로 인코딩하여도 H264와 용량차이가 없네요. 4

  11. No Image 20Apr
    by PLK
    2023/04/20 by PLK
    in 질문
    Views 628  Likes 0 Replies 4

    AAC LC 음원을 AC3 2채널로 인코딩할때 질문입니다. 4

  12. 19Apr
    by vpdle
    2023/04/19 by vpdle
    in 질문
    Views 731  Likes 0 Replies 1

    인코딩이 1분에서 5분밖에 안되네요? 1

  13. No Image 19Apr
    by 키읔히흫
    2023/04/19 by 키읔히흫
    in 질문
    Views 596  Likes 0 Replies 1

    샤나인코더 uninst 다운받는 방법이 있을까요? 1

  14. 19Apr
    by 키읔히흫
    2023/04/19 by 키읔히흫
    in 질문
    Views 394  Likes 0 Replies 1

    샤나인코더 재설치가 안되요 해결방법 알려주세요 부탁드립니다. 1

  15. 15Apr
    by 채여이
    2023/04/15 by 채여이
    in 질문
    Views 678  Likes 0 Replies 4

    파일이 안올라가요 .. 4

  16. No Image 14Apr
    by 키읔히흫
    2023/04/14 by 키읔히흫
    in 질문
    Views 745  Likes 0 Replies 2

    인코딩 하였던 파일을 다시 인코딩 할 경우 2

  17. No Image 09Apr
    by ㅈㄴㄷ
    2023/04/09 by ㅈㄴㄷ
    in 질문
    Views 675  Likes 0 Replies 1

    인코딩 하면 자막이 이상합니다 1

  18. No Image 09Apr
    by 샤나하냥
    2023/04/09 by 샤나하냥
    in 질문
    Views 917  Likes 0 Replies 2

    [질문] m4a나 mp3 등 음원파일에 이미지 합치는 방법 [*.m4a(or *.mp3)+*.jpg(or *.png)=*.mp4] 2

  19. No Image 06Apr
    by 피넛버터
    2023/04/06 by 피넛버터
    in 질문
    Views 1182  Likes 0 Replies 2

    8k 영상을 4k로 변환 2

  20. No Image 05Apr
    by 벨라미
    2023/04/05 by 벨라미
    in 질문
    Views 807  Likes 0 Replies 2

    영상자체에 내장된 자막을 인코딩하면 자막이 안나오는데... 2

  21. No Image 01Apr
    by 남이사랑
    2023/04/01 by 남이사랑
    in 질문
    Views 869  Likes 0 Replies 4

    안녕하세요 영상 음성 합치기 분리할때 4

  22. No Image 31Mar
    by 아이브
    2023/03/31 by 아이브
    in 질문
    Views 464  Likes 0 Replies 5

    특정 오디오 지연값을 기본으로 설정할 방법이 있을까요? 5

  23. 31Mar
    by 솔티드카라멜
    2023/03/31 by 솔티드카라멜
    in 질문
    Views 979  Likes 0 Replies 5

    비트레이트를 딱 2000kbps 로 맞추는 방법이 있을까요? 5

  24. No Image 30Mar
    by RTX 4070
    2023/03/30 by RTX 4070
    in 질문
    Views 1610  Likes 0 Replies 6

    RTX 40번대는 NVENC 품질이 좀 괜찮은가요? 6

  25. 27Mar
    by 리디형
    2023/03/27 by 리디형
    in 질문
    Views 662  Likes 0 Replies 2

    똑같은 설정을 썼는데 어떤 파일에서 인코딩이 이상하게 됩니다. 2

  26. No Image 25Mar
    by seoku
    2023/03/25 by seoku
    in 질문
    Views 462  Likes 0 Replies 1

    파일명 설정하는 방법 있을까요? 1

쓰기
Board Pagination Prev 1 ... 11 12 13 14 15 16 17 18 19 20 ... 161 Next
/ 161